Beskrivelse
Nozzle Temperature 220-250°C
Bed Temperature 90°C
Closed chamber not required
Fan 0-25%
Flowrate 95-105%
Printing Speed < 100 mm/s
Surface masking tape
Retraction (direct) 2-3 mm
Retraction (bowden) 3-5 mm
Retraction Speed 20-45 mm/s
Drying conditions 60°C / 4h
Notes Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.
